Are your Water Damage Inspection services available in Clovis?

Yes, COS Water Damage Restoration provides round-the-clock Water Damage Inspection services directly in Clovis, NM.

How much does emergency service cost in Clovis?

We offer upfront, transparent pricing with no hidden fees for all service calls in Clovis.

Water Damage Inspection in Clovis, NM

Name: COS Water Damage Restoration
Telephone: +1-844-499-0972
Price range: $$

Why Choose Us

What a Professional Water Damage Inspection Covers in Clovis

Here's what makes our Clovis inspection service more than a visual walk-through.

📷

FLIR Thermal Imaging

FLIR infrared thermal cameras detect temperature differentials in structural surfaces — a wet wall cavity cools differently than a dry one during evaporation, making moisture migration visible as a thermal signature even behind intact drywall. Our Clovis inspection team uses thermal imaging as the primary tool for tracing water migration paths through wall systems, subfloor assemblies, and ceiling cavities, identifying affected areas before a single pin is driven into a wall.

📈

Calibrated Meter Readings

Qualitative assessment says "it looks wet." Quantified readings say "this framing is at 28% moisture content and the dry standard is 10%."

📋

Full Written Report

A verbal assessment is an opinion. A written report with instrument readings is documentation.

🏠

Pre-Purchase & Post-Remediation

Our Clovis inspection service covers two distinct use cases that require slightly different approaches: pre-remediation inspection (mapping an active or recent water event for claim documentation and remediation scoping) and pre-purchase or post-remediation verification inspection (confirming whether previous water damage was properly remediated or whether current conditions indicate an ongoing or previous water problem). Both use the same instrument suite and produce the same written report format, but the findings are interpreted differently for each use case.

Services

What Our Clovis Water Damage Inspection Covers

COS Water Damage Restoration's Clovis inspection team covers every structural assembly type, every common water migration path, and every inspection use case encountered in residential and commercial water damage situations in NM.

🔎

Active & Recent Water Event Inspection

When a water damage event has just occurred in a Clovis property — or happened within the last several days — our inspection maps the full extent of saturation while the moisture is still detectable by thermal imaging and direct meter readings. This inspection is the foundation of the remediation scope and the insurance claim documentation. Without it, remediation crews are guessing at what to dry, and insurance carriers are estimating on incomplete data. Our Clovis active event inspection captures the full saturation picture at the moment of peak detectable moisture — when the readings tell the most accurate story of what happened.

🏠

Pre-Purchase Water Damage Inspection

Pre-purchase water damage inspections in Clovis are scheduled on the buyer's timeline and the written report is available for the transaction file.

📋

Post-Remediation Verification Inspection

After a water damage remediation project is completed in a Clovis property — whether by COS Water Damage Restoration or another company — a verification inspection confirms that structural drying was completed to standard moisture content levels and that no hidden moisture was left behind. This inspection is requested by property owners who want independent confirmation of completion, by landlords who need documentation before returning a property to tenancy, and by sellers who need to demonstrate to a buyer that prior water damage was fully resolved. Our Clovis post-remediation inspection produces a written verification report formatted for real estate and insurance use.

🧹

Mold Risk Assessment Inspection

Properties in Clovis that had a water event 48 hours or more before inspection — or where a slow leak went undetected for an extended period — may present mold risk alongside ongoing moisture concerns. Our mold risk assessment inspection identifies the structural conditions that support mold growth: elevated moisture content in organic materials, elevated ambient relative humidity, and the presence of visible mold growth on surface or semi-concealed areas. This assessment determines whether a standard drying-focused remediation is appropriate or whether S520-standard mold remediation protocols need to be incorporated into the project scope.

🔮

Crawlspace & Below-Grade Inspection

Below-grade moisture in Clovis properties is underdetected and underlies a significant portion of structural issues discovered later.

🔨

Insurance Documentation Inspection

When an insurance carrier requests additional documentation for a water damage claim — or when a claim has been disputed based on damage scope — our Clovis insurance documentation inspection provides the instrument-backed evidence that supports the remediation scope. Thermal images with annotations, moisture meter readings at labeled sensor points, water category determination, and written assessment of the connection between the reported event and the documented damage create a claim file that can withstand adjuster scrutiny.

Professional Water Damage Inspection technician working in Clovis, NM

24/7 Emergency Water Damage Inspection experts in Clovis, NM

Our Process

How a Water Damage Inspection Works in Clovis

Schedule Your Clovis Inspection

Same-day scheduling available for active water events. Pre-purchase inspections booked on your transaction timeline.

On-Site Assessment

Systematic, instrument-driven, fully documented during the on-site session.

Findings Review

After the on-site assessment, your Clovis inspector reviews the key findings with you — which areas are affected, what the readings indicate, what water category applies, and what remediation is indicated. If you have questions about specific readings or want to understand what a particular finding means, this is the conversation for it. The verbal review happens on-site.

Written Report Delivery

The written inspection report — thermal images with annotations, sensor point readings mapped to a floor plan, water category determination, and recommended scope — is delivered within 24-48 hours of the on-site session, formatted for insurance, remediation, or real estate use as appropriate to your situation. We're available to answer adjuster or real estate agent questions about the findings.

Reviews

Clovis Customers on Our Water Damage Inspection Service

★★★★★

"The thermal imaging session was what sold me on how a proper Clovis water damage inspection should work. Our inspector traced water migration I never could have guessed at — the event in the utility room had spread moisture into the adjacent storage room wall framing more than twelve feet away. The written report documented all of it and our remediation contractor used it directly to scope the drying project."

B. Ochieng

Verified Clovis, NM Customer

★★★★★

"I had noticed a musty smell in a room of my Clovis home for months before calling COS Water Damage Restoration. Their inspection found active moisture in the subfloor assembly under an area rug — a slow pipe drip that had been going on long enough to saturate the subfloor significantly without any visible surface evidence. The written report documented the moisture readings, the thermal images showing the extent of the affected area, and the recommended scope. I would never have found this without the thermal camera."

R. Ferreira

Verified Clovis, NM Customer

★★★★★

"We manage a portfolio of Clovis rental properties and COS Water Damage Restoration's inspection service is what we use every time a water event is reported, prior to any remediation starting. The inspection report maps the damage completely — it's what we give our remediation contractor as the scope of work and what we give our insurer as the damage documentation. Having a consistent, instrument-backed inspection process has eliminated the disputes we used to have about whether remediation was complete or whether the damage scope matched what we claimed."

D. Kowalczyk

Verified Clovis, NM Customer

FAQs

Common Questions — Water Damage Inspection in Clovis

How is COS Water Damage Restoration's Water Damage Inspection different from a home inspection?

A general home inspection in Clovis covers a broad range of systems and components with a visual assessment of each. Our water damage inspection is a specialized, instrument-driven assessment focused specifically on moisture in structural assemblies — using FLIR thermal imaging to detect moisture migration behind surfaces and calibrated moisture meters to quantify readings at specific locations. The depth and specificity of water damage findings from our inspection are not replicated by a general home inspection, which uses a pin moisture meter at best and does not typically include thermal imaging or written moisture content readings at labeled sensor points.

How long does a Water Damage Inspection take in Clovis?

Most Clovis residential water damage inspections take 1-3 hours on site, depending on the size of the property, the complexity of the suspected moisture migration, and whether below-grade spaces are included in the scope. Commercial inspections may take longer depending on the building size. The written report follows within 24-48 hours of the on-site session.

Can the inspection report be used for a real estate transaction in Clovis?

Yes — our Clovis inspection reports are formatted to be useful in real estate transactions, both for buyers evaluating disclosed or suspected water damage and for sellers who want to document that prior events were properly remediated. The written report includes thermal images, labeled sensor point readings, written findings, and a professional assessment that real estate agents, sellers, buyers, and their attorneys can work with. We can also answer questions directly from the parties to the transaction.

Will COS Water Damage Restoration also do the remediation if the inspection finds active moisture in Clovis?

Yes — COS Water Damage Restoration performs both water damage inspection and full remediation services in Clovis. If the inspection finds active moisture requiring remediation, you can move directly from inspection to remediation with the same company — or take the written report to any contractor of your choice. There's no obligation to use our remediation services following an inspection, though many Clovis clients choose to since we already know the property's moisture profile from the inspection data.

Does an inspection detect mold in Clovis properties?

Our Clovis water damage inspection identifies structural conditions that support mold growth (elevated moisture content in organic materials) and visually documents visible mold growth on surfaces and in accessible spaces. It is not an air quality test or a microbial sampling protocol — those are distinct disciplines performed by industrial hygienists and involve lab analysis. If our inspection findings suggest significant mold risk, we can coordinate a referral to a licensed industrial hygienist in Clovis for air quality sampling and reporting.

How do I prepare for a Water Damage Inspection at my Clovis property?

Provide access to the areas you suspect are affected, including any locked utility rooms, crawlspace access hatches, and below-grade storage areas. If you have documentation of a prior water event — photos, previous repair receipts, insurance claim paperwork — sharing that with our inspector before the visit helps contextualize the findings. Other than access, no special preparation is needed. Our inspector arrives with all equipment and documentation tools.

Service Area

Water Damage Inspection Coverage — Clovis and NM

COS Water Damage Restoration's certified inspection team serves Clovis and surrounding communities throughout NM. Call +1-844-499-0972 to schedule your Clovis inspection.

Clovis is a city in and the county seat of Curry County, New Mexico. The city had a population of 37,775 as of the 2010 census, and a 2019 estimated population of 38,319. Clovis is located in the New Mexico portion of the Llano Estacado, in the eastern part of the state.